HXD-PM01 Semi-Automatic Double Side Labeler for Square Bottles

Overview

The HXD-PM01 is a semi-automatic double side labeler for square bottles. It applies front and back labels in one cycle, or one side only, and uses self-adhesive labels. A compressed air supply is required.

HAIXINGDA is a machinery manufacturer based in Dongguan, Guangdong, China, specializing in filling, packaging, sealing, capping, and labeling equipment.

This square bottle labeler is intended for production work on the flat faces of square bottles. In that use it works as a flat bottle label applicator, and it can run as a front and back labeler or apply one side only. It can be designed to match upstream and downstream machines. If your bottles or labels need a custom design, we can work from your requirements and samples.

For other labelers, see the labeler category.

Key Features

• Works as a front and back labeler in one cycle, or applies one side only.
• Semi-automatic operation: the operator places the bottle on the fixture, then starts the cycle.
• Uses self-adhesive labels only.
• Label rolls and applicator assemblies are arranged on both sides of the fixture, as shown on the current product photos.
• When you change to another bottle size, the operator adjusts the unit and then confirms the setup with sample bottles.
• The unit can be designed to match upstream and downstream machines.

Technical Specifications

Suitable Applications

Use this labeler in production where square bottles need self-adhesive labels on the front and back, or on one side only. It can be set up as a labeling station with other packaging equipment when the design is matched to those machines, or used as its own work station.

This page does not list industries or bottle examples beyond square bottles. Send your bottles, labels, and target output so we can confirm whether this unit fits the job.

How It Works

This is a semi-automatic labeler. A typical cycle is as follows:

1. Connect a compressed air supply before use.
2. Load the self-adhesive label rolls on the applicator assemblies. Use both sides for a front and back label, or one side when only one face is required.
3. Place the square bottle on the fixture.
4. Start the cycle from the touchscreen or the start button on the cabinet.
5. The labeler applies the front and back labels in one cycle, or the single side you have set.
6. Remove the bottle and place the next one.

We will confirm the handling steps against the bottles you send.

Bottle Compatibility

This unit is specified for square bottles. Before you purchase, check the points below and prepare the dimensions we will need to review.

• Bottle shape: Confirm whether your bottle is square or flat-square (rectangular). This page is specified for square bottles. If your bottle is rectangular, send a sample or a drawing so we can confirm whether this unit is suitable. Do not assume it is a match from the photos alone.
• Labeling surface: Check whether each labeling face is flat, and whether it has any curvature. Faces that are curved or uneven should be confirmed with a sample.
• Label length: The label length must not exceed the labeling surface.
• Required output: Note how many bottles per hour you need to label, so we can review that target once the speed range is confirmed.

Please prepare the following before you inquire:

• Bottle height, width, and depth
• Label length and width
• Whether the labeling surface is flat, and any curvature
• Target output in bottles per hour
• Label roll core (inner diameter), if known

Machine Testing

Send your sample bottles and labels so we can run a test and share the results before shipment. If the bottles, labels, or the way this labeler should sit with your other equipment need a custom design, we can work from those samples and your layout.

FAQ

Request a Quote

To discuss your bottles, labels, and target output, message us on WhatsApp: 8618319236484.

Please include bottle height, width, and depth; label length and width; whether the labeling surface is flat; your target bottles per hour; and the label roll core if you know it. If you can ship samples, we can test them and share the results before shipment.